Meade #64ST T-Adapter for ETX-70/80AT Telescopes - For Attachment of Camera

Comments about Meade #64ST T-Adapter for ETX-70/80AT Telescopes - For Attachment of Camera:

This adapter securely attaches to a T-adapter. The only problem is that with the camera attached, the telescopes does not have its full range of motion due to the camera hitting the mount. This means that you can only image certain targets. It also means that you have to remove the camera while changing targets or your risk ruining the drive motors because the scope is getting stuck. This increases the chance of attracting sensor dust to your camera's sensor because of the number of times where you will have to remove it.

Comments about Meade #64ST T-Adapter for ETX-70/80AT Telescopes - For Attachment of Camera:

Inexpensive way to connect SLR to Meade telescope for some great 350mm telephoto shots.

Comments about Meade #64ST T-Adapter for ETX-70/80AT Telescopes - For Attachment of Camera:

This accessory allows you to attach a T-Ring adapter to your ETX 70/80 rear port. In other words, you also need to purchase the T-Ring adapter designed for your type of camera.

This type of connection, when used with your SLR film camera, does not provide the same magnification that your eye pieces do. Since the image is basically coming straight into your camera there is no way to magnify it. (note: this may not be the case with digital cameras mounted this way).

Since the adapter is plastic you need to be careful when tightening. The threads strip very easily and you may find you have a permanent addition to the telescope.

This provides a quick and inexpensive way to enter into astrophotography.